Dust Test Chamber Description
The dust test chamber can accurately simulate the dust conditions in the natural environment, and the simulated dust environment conforms to the IPX5/IPX6 test requirements. The sand-dust test chamber is mainly used by laboratories or manufacturers to detect the protective ability of the product casing against dust and to determine the level of dust protection.
Application
Test standards
Test Chamber Parameter
Item | Specification |
Internal dimension | 800W*800D*800Hmm |
External dimension | 1300W*1000D*1700Hmm |
Test sample | Size W20cm- L30cm-D15cm, weight 0.5kg |
Chamber material | SUS304 Stainless steel |
Specifications of square mesh sieve | Mesh hole 75um, mesh metal wire diameter 50um |
Talcum powder amount | 2kg/ m |
Airflow speed | No more than 2m/s |
Door | Left open door with tempered glass door |
Controller | PLC Touch Screen controller, programmable to set as below cycle: a. Blowing dust time (Stop/Blow) m/s b. Cycle time: can be adjusted c. Pre-set test time: 0s ~99m99s |
Vacuum system | Pressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump |
Vacuum pump capacity | 60-600 L/H |
Fan | Centrifugal fan |
Safety protection devices | Meter over-temperature function, Phase shortage protection, Power short-circuit protection |
![]() |
HAIDA INTERNATIONAL EQUIPMENT CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |