Shoe Lace Abrasion Tester

2800 USD ($)/Unit

Get a Price/Quote

Product Details:

Equipment Type Shoe Lace Abrasion Tester
Max Height 350 mm
Automation Grade Semi-automatic
Resolution 1 cycle
Accuracy 1 cycle
Application Testing abrasion resistance of shoe laces
Features Programmable counter, Auto stop, Easy loading of specimens
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Shoe Lace Abrasion Tester Price And Quantity

Minimum Order Quantity 1 Unit
Price 2800 USD ($)/Unit

Safety Provision Emergency stop button
Packaging Type Wooden case with protective foam
Test Load Specified by standard (10N - 30N adjustable)
Noise Level <65 dB
Test Mode Continuous / Pre-set
Replacement Parts Available on request
Applicable Standards ISO 22774, SATRA TM150, ASTM D2099
Service Support Onsite installation & training
Dimensions (L x W x H) 550 x 400 x 350 mm
Cycle Counter 0~999,999 digital programmable
Material of Construction Powder coated steel housing

Shoe Lace Abrasion Tester Product Specifications

Interface Type Manual and digital
Port Size 6 mm Air inlet
Display Type Digital LCD
Power Supply AC 220V, 50Hz
Temperature Room temperature (10C - 35C)
Frequency 50Hz
Response Time Immediate
Number of Specimens 4 pairs
Test Width 20 mm
Gas Pressure 4~6 bar
Control Mode Digital control
Machine Weight 45 kg
Test Stroke 35 mm
Test Range 0-999,999 cycles
Resolution 1 cycle
Accuracy 1 cycle
Max Height 350 mm
Equipment Type Shoe Lace Abrasion Tester
Automation Grade Semi-automatic
Usage Abrasion resistance test
Operating Voltage 220V AC
Mounting Type Tabletop
Humidity 45%~85% RH
Test Speed 60 cycles/min
Specimen Size Laces up to 120 cm
Measuring Range 0-999,999 cycles
Features Programmable counter, Auto stop, Easy loading of specimens
Application Testing abrasion resistance of shoe laces

Safety Provision Emergency stop button
Packaging Type Wooden case with protective foam
Test Load Specified by standard (10N - 30N adjustable)
Noise Level <65 dB
Test Mode Continuous / Pre-set
Replacement Parts Available on request
Applicable Standards ISO 22774, SATRA TM150, ASTM D2099
Service Support Onsite installation & training
Dimensions (L x W x H) 550 x 400 x 350 mm
Cycle Counter 0~999,999 digital programmable
Material of Construction Powder coated steel housing

Shoe Lace Abrasion Tester Trade Information

FOB Port SHENZHEN
Payment Terms Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C), Paypal, Cash on Delivery (COD), Western Union, Delivery Point (DP), Cash Against Delivery (CAD), Telegraphic Transfer (T/T), Days after Acceptance (DA), Cash in Advance (CID), Cheque, Cash Advance (CA)
Supply Ability 15 Unit Per Week
Delivery Time 5 Days
Sample Policy Contact us for information regarding our sample policy
Packaging Details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Main Export Market(s) Australia, North America, Eastern Europe, South America, Western Europe, Africa, Central America, Middle East, Asia
Certifications CE,ISO

Product Description

Shoe lace abrasion tester

Introduction

Shoe lace abrasion tester is used for a variety of materials such as cotton, hemp and chemical fiber woven lace abrasion resistance determined.

Standard Features

Fixture	4 groups
Counter	LCD, 0~999, 999
Test speed	1005cpm
Dimension	66x50x40cm
Weight	61kg
Power	1,AC 220V, 50Hz,

Versatile and Accurate Testing Solution

Engineered to meet rigorous international standards such as ISO 22774, SATRA TM150, and ASTM D2099, the Shoe Lace Abrasion Tester provides reliable, repeatable results. Its digital control interface, programmable cycle counter, and easily adjustable test load allow users to customize tests for different lace materials and specifications. The testers robust steel housing ensures durability, while its quiet operation makes it suitable for lab environments.

Simplified Operation and Enhanced Safety

The device features straightforward specimen loading and an ergonomic tabletop design. An intuitive LCD display gives immediate cycle updates, and the emergency stop button ensures user safety. With semi-automatic operation and onsite installation/training support, the tester offers ease of use for both new and experienced operators.

Reliable Results in Any Setting

Built for everyday laboratory or manufacturing use, the Shoe Lace Abrasion Tester maintains accuracy and stability across a broad range of humidity (45%85% RH) and temperatures (10C 35C). Each test cycle is resolved to a single count (1 accuracy), allowing detailed analysis of lace durability. Its compact size and protective packaging facilitate convenient transport and setup.

FAQs of Shoe Lace Abrasion Tester:

Q: How does the Shoe Lace Abrasion Tester evaluate abrasion resistance?

A: The tester conducts abrasion cycles on shoe laces by moving them back and forth across a specified width and stroke (20 mm and 35 mm, respectively), under adjustable loads (10N - 30N), until failure or a pre-set number of cycles is reached. The programmable digital counter records every cycle with immediate response and high accuracy.

Q: What are the benefits of using a programmable counter and digital control interface on this machine?

A: A programmable counter and digital control interface allow precise cycle setting, easy monitoring, and repeatable test protocols, enhancing accuracy and efficiency in assessing lace durability. The immediate cycle display and auto stop feature streamline operations and reduce human error.

Q: When should I replace parts or seek service support for the tester?

A: Replacement parts are available upon request, and routine maintenance is recommended to ensure accurate operation. If performance issues arise or as part of scheduled servicing, onsite installation and training are provided by the manufacturer or supplier.

Q: Where can I install and safely operate this abrasion tester?

A: The tabletop design allows for convenient installation in laboratories, manufacturing quality control areas, or research facilities, provided there is access to the required AC 220V, 50Hz power supply and suitable air pressure (46 bar). Safe operation is ensured with the emergency stop button and robust safety provisions.

Q: What is the process for testing shoelaces using this abrasion tester?

A: To begin, load up to four pairs of laces (up to 120 cm each) into the machine, set the required test parameters (load, cycles, speed, and mode), and start the test. The machine will run at 60 cycles per minute until the specified cycle or lace failure is detected, recording results on the digital LCD display.

Q: How will using this tester improve my quality control process?

A: Performing standardized abrasion resistance tests ensures that shoe laces meet durability criteria set by ISO, SATRA, and ASTM, lowering product failure rates and enhancing brand reputation. Accurate cycle counting and adjustable parameters improve comparability and product consistency.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Shoes Test Equipment' category

Leather Waterproof dynamic testing machine Price : 3200 USD ($)/Set Minimum Order Quantity : 1 Power Supply : AC 220V, 50/60 Hz Application : Waterproof evaluation of leather material Port Size : 6 mm Air Inlet Interface Type : Touch panel Display Type : Digital LCD Frequency : 50/60 Hz Temperature : Room temperature (10C~35C) Number of Specimens : 4 Test Width : 70 mm Control Mode : Digital controller Test Range : 0~9999 cycles Test Stroke : 25 mm Machine Weight : Approx. 85 kg Resolution : 1 cycle Max Height : 540 mm Automation Grade : Semiautomatic Usage : Laboratory, footwear, and leather QC testing Operating Voltage : 220V Humidity : 40%~70% RH Mounting Type : Benchtop Test Speed : 60 2 cycles/min Specimen Size : 70 mm 70 mm Features : Waterproof construction, automatic timer, adjustable specimen holder Capacity : Standard Response Time : Instantaneous Gas Pressure : 0.4 0.7 MPa Accuracy : 1 cycle Equipment Type : Dynamic testing machine Measuring Range : User selectable Hardness : Standard

Send Inquiry

Leather resistance tester Price : 2800 USD ($)/Unit Minimum Order Quantity : 1 Power Supply : AC 220V, 50Hz Application : Abrasion, flexing, and resistance testing of leather Port Size : 1/4 inch Interface Type : Push button panel Display Type : Digital LCD display Frequency : 50Hz Temperature : 15C~35C Number of Specimens : 2 Test Width : 60 mm Control Mode : Digital display, preset cycles Test Range : 0~999999 cycles Test Stroke : 35 mm Machine Weight : 32 kg Resolution : 1 cycle Max Height : 500 mm Automation Grade : Semiautomatic Usage : Testing leather sample resistance to abrasion and flexing Operating Voltage : 220V AC Humidity : 40%~80% RH Mounting Type : Benchtop Test Speed : 0~60 cycles/min Specimen Size : 120 x 50 mm Features : Compact design, programmable cycle count, selfstop function Capacity : 2 x 500g weights Response Time : Instantaneous Gas Pressure : 0.5~0.7 MPa Accuracy : 1 cycle Equipment Type : Leather Resistance Tester Measuring Range : 0~999999 cycles

Send Inquiry

Shoes Withstand Voltage Test Equipment Minimum Order Quantity : 1 set Power Supply : AC 220V, 50Hz Application : Testing electrical withstand voltage capability of safety shoes and boots Port Size : Standard inch Interface Type : Panel Mounted Controls Display Type : Digital LED/LCD Frequency : 50 Hz Temperature : 10C 40C Number of Specimens : 1 Test Width : 100200 mm Control Mode : Digital/Automatic Test Range : 0 20 kV Test Stroke : 0150 mm Machine Weight : Approx. 6080 kg Resolution : 0.1 kV Max Height : 600 mm Automation Grade : SemiAutomatic Usage : Industrial safety compliance testing Operating Voltage : 220V Humidity : Less than 85% RH Mounting Type : Floor Stand Test Speed : Adjustable, standard 1020 mm/s Specimen Size : Shoe Size Range 230320 mm (European size 3650) Features : Overload protection, Trip alarm, Auto/manual mode Capacity : 3 kVA Response Time : 2 ms Gas Pressure : 0.50.7 MPa Accuracy : 1% Measuring Range : Up to 20,000V

Send Inquiry

DIN abrasion tester Price : 1000 USD ($)/Unit Minimum Order Quantity : 1 Power Supply : AC 220V, 50/60 Hz Application : Rubber, tire, footwear, conveyor belt abrasion resistance measurement Port Size : 6 mm air inlet Interface Type : Manual and Digital Display Type : Digital Frequency : 50/60 Hz Hertz (HZ) Temperature : 15C 40C Celsius (oC) Number of Specimens : Single specimen per test Test Width : 20 mm (max) Millimeter (mm) Control Mode : Digital display and control Test Range : Maximum 200 mm loss Test Stroke : 40 mm Machine Weight : About 70 kg Kilograms (kg) Resolution : 0.01 mm Max Height : 350 mm Automation Grade : SemiAutomatic Usage : Lab Testing Operating Voltage : AC 220V Volt (V) Humidity : 35% 75% RH Mounting Type : Benchtop Test Speed : 40 m/min Specimen Size : 16 mm diameter 6~8 mm thickness Millimeter (mm) Features : Adjustable counter; safety protection; robust metallic frame Equipment Type : DIN Abrasion Tester Hardness : Test roller hardness: 85 5 IRHD

Send Inquiry

SEND INQUIRY CALL ME FREE

HAIDA INTERNATIONAL EQUIPMENT CO., LTD.

Contact Details

FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town,Dongguan - 523710, Guangdong, China
Phone :86-1591-7693151
haidads@qc-test.cn
Send Inquiry

Email us : haidads@qc-test.cn

Ms Lisa (Manager)
Mobile : +8613662707979, +8613829267288, +8615016776323, +8618373745787, +8618236912012, +8613602361535, +8613925747786

Send Inquiry

Quick Links