Shoe Heel Impact Fatigue Testing Machine

500.00 - 3500.00 USD ($)

Get a Price/Quote

Product Details:

Automation Grade Semi-automatic
Measuring Range Adjustable as per test requirements
Response Time <1s
Humidity Max 85% RH (non-condensing)
Operating Voltage 220V AC
Port Size Standard 8 mm air inlet
Accuracy 0.1 mm
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Shoe Heel Impact Fatigue Testing Machine Price And Quantity

Minimum Order Quantity 1 Set
Price Range 500.00 - 3500.00 USD ($)

Sample Fixation Method Adjustable clamps for various heel shapes
Compliance Standard SATRA TM20, ISO 19553, EN ISO 20344
Colour Grey/Blue (powder coated finish)
Cycle Counter Preset automatic stop after target cycles
Noise Level 70 dB
Air Consumption Approx. 5 L/min
Impact Hammer Weight Approximately 400 g
Safety Feature Transparent enclosure shield and emergency stop
Dimensions (L x W x H) Approx. 780 440 600 mm

Shoe Heel Impact Fatigue Testing Machine Product Specifications

Test Stroke 0~60 mm adjustable
Features Heavy duty, durable construction, digital cycle counter, adjustable settings, safety shield, low noise operation
Usage For testing heel fatigue resistance
Display Type Digital LCD
Max Height 600 mm (including shield)
Application Impact and fatigue test for ladies and mens shoe heels
Gas Pressure 0.5~0.7 MPa
Frequency 50/60 Hz
Power Supply AC 220V, 50Hz
Specimen Size Heel max height 60 mm, width 70 mm
Temperature 10C~35C
Test Width Up to 70 mm
Resolution 0.01 mm
Capacity Configurable based on test requirement
Interface Type Panel control
Equipment Type Shoe Heel Impact Fatigue Testing Machine
Hardness Steel working surface: HRC55-60
Test Range 1~999999 cycles
Control Mode Digital Control/Manual Switch
Number of Specimens 1 piece per test
Test Speed 60~150 impacts/min adjustable
Mounting Type Bench-top
Accuracy 0.1 mm
Humidity Max 85% RH (non-condensing)
Machine Weight Approx. 85 kg
Port Size Standard 8 mm air inlet
Operating Voltage 220V AC
Response Time <1s
Automation Grade Semi-automatic
Measuring Range Adjustable as per test requirements

Sample Fixation Method Adjustable clamps for various heel shapes
Compliance Standard SATRA TM20, ISO 19553, EN ISO 20344
Colour Grey/Blue (powder coated finish)
Cycle Counter Preset automatic stop after target cycles
Noise Level 70 dB
Air Consumption Approx. 5 L/min
Impact Hammer Weight Approximately 400 g
Safety Feature Transparent enclosure shield and emergency stop
Dimensions (L x W x H) Approx. 780 440 600 mm

Shoe Heel Impact Fatigue Testing Machine Trade Information

FOB Port Shenzhen China
Payment Terms Cash on Delivery (COD), Paypal, Letter of Credit (L/C), Western Union, Letter of Credit at Sight (Sight L/C), Delivery Point (DP), Cash Against Delivery (CAD), Telegraphic Transfer (T/T), Days after Acceptance (DA), Cash in Advance (CID), Cheque, Cash Advance (CA)
Supply Ability 150 Set Per Month
Delivery Time 15 Week
Packaging Details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.

Product Description

As the main manufacturer and supplier of this optimum quality approved Shoe Heel Impact Fatigue Testing Machine. This is made by the standard and used to test the resistance of the shoe heel in a specific number of affecting vitality and recurrence at consistent blow until the sharp edge heel is broken. From which we can comprehend the persist record and the nature of the heel. The offered range of Shoe Heel Impact Fatigue Testing Machine is manufactured by using the premium quality stainless steel and other necessary components to meet industry standards.

Products Parameters :

Impact frequency	60 blow /min
Impact energy	0.68 J / blow
Swing arm	12.5 mm
Impact Hammer	57mm, thick 20mm
Testing angle	90o
Specimen adjustable range	Up to down~90mm, left to right~80mm, angle 0^o~180^o
Timer	LCD, 0~999,999
Volume-host machine	50x45x50cm
Weight	69kg
Power	AC220V, 50Hz

Other Details :

Minimum	1 SET
Delivery	15 days after order.
Country	China
Brand Name	HD
Package	Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Payment	L/C, D/P, T/T
Price	FOB, CIF

Advanced Digital Control

The machine is equipped with an intuitive panel interface, digital cycle counter, and adjustable settings for both impact speed and stroke. Operators can easily preset test cycles, monitor digital LCD readouts, and benefit from rapid response times for efficient and precise testing.

Safety Features and Low Noise Operation

Safety is paramount, with a transparent enclosure shield protecting users from debris and an emergency stop button for swift shutdowns. The system operates at noise levels 70 dB, ensuring a quieter working environment suitable for research labs and manufacturing floors.

Versatile Testing for Multiple Heel Types

Adjustable clamps accommodate a wide range of heel shapes and sizes, making the equipment versatile for both ladies and mens footwear. Configurable capacity and an adjustable measuring range ensure it meets varied testing requirements for different shoe designs.

FAQs of Shoe Heel Impact Fatigue Testing Machine:

Q: How does the Shoe Heel Impact Fatigue Testing Machine operate?

A: The machine uses an approximately 400 g impact hammer to repeatedly strike the heel, simulating real-life fatigue conditions. Test parameters such as impact speed (60~150 impacts/min), stroke (0~60 mm), and number of cycles (up to 999,999) are all digitally adjustable.

Q: What types of shoe heels can be tested with this equipment?

A: It is designed for both ladies and mens shoe heels, supporting specimens up to 60 mm in height and 70 mm in width, making it suitable for most commercial heel designs and materials.

Q: When should the cycle counter be preset for automatic stop during testing?

A: The digital cycle counter allows operators to preset the required number of test cycles before each test. The machine will automatically stop once the target cycle count is reached, enhancing accuracy and preventing over-testing.

Q: Where should this testing machine be installed for optimal use?

A: This bench-top machine should be placed on a stable work surface in a well-ventilated laboratory or quality control area within the recommended temperature range of 10C35C, and below 85% relative humidity (non-condensing).

Q: What safety measures are in place for machine operators?

A: Operators are protected by a transparent enclosure shield that contains debris, and an emergency stop button allows for immediate machine shutdown in case of unexpected issues, ensuring safe operation at all times.

Q: How can users benefit from using this testing machine?

A: The equipment enables accurate, repeatable assessment of heel fatigue and impact resistance, ensuring compliance with industry standards and helping footwear manufacturers deliver high-quality, durable products to the market.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Shoes Test Equipment' category

Shoe peeling strength testing machine Price : 2000 USD ($)/Unit Minimum Order Quantity : 1 Display Type : Digital LCD Usage : Footwear testing laboratory Max Height : 600 mm Application : Testing the peeling strength of shoe soles and upper material bond Features : Microprocessor controlled, Emergency stop, Overload protection Test Stroke : 100 mm Interface Type : RS232 Capacity : 500 N Resolution : 0.1 N Test Width : 20 mm / 25 mm Temperature : 10C 35C Specimen Size : min. 150 mm 25 mm Power Supply : AC 220V, 50Hz Equipment Type : Peeling Strength Testing Machine Frequency : 50 Hz Test Speed : 100 mm/min (adjustable) Accuracy : 1% Mounting Type : Table top Control Mode : Digital control Test Range : 0 500 N Number of Specimens : 1 at a time Automation Grade : Semiautomatic Measuring Range : 0500 N Response Time : Instant Machine Weight : approx. 65 kg Humidity : 20% 80% RH Operating Voltage : AC 220V Port Size : 1/4 inch Gas Pressure : 0.5 0.7 MPa

Send Inquiry

Shoes Outsole Flexing Test Equipment Minimum Order Quantity : 1 set Display Type : Digital LCD Usage : Footwear laboratory testing Max Height : 500 mm Application : Flex endurance test of shoe outsoles Features : Adjustable stroke & speed, safety cover, autostop Test Stroke : 20~50 mm (adjustable) Interface Type : Push button / Digital input Capacity : 2 test stations Resolution : 1 cycle Test Width : Up to 120 mm Temperature : Room temperature (10~35C) Specimen Size : Length 100250 mm Power Supply : 220V AC, 50Hz Equipment Type : Outsole Flexing Tester Frequency : Singlephase, 50Hz Test Speed : 60~300 cycles/min (adjustable) Accuracy : 1 cycle Mounting Type : Freestanding floor model Control Mode : Digital / Manual Test Range : Up to 80 mm flex angle Number of Specimens : 2~4 pieces Automation Grade : Semiautomatic Measuring Range : 0~999,999 cycles Response Time : < 1 second Machine Weight : Approx. 100 kg Humidity : 20%~80% RH (noncondensing) Operating Voltage : 220V Port Size : 1/4 inch air inlet Gas Pressure : 0.50.7 MPa Hardness : Applicable for soft and hard outsoles

Send Inquiry

Martindale abrasion pilling tester Price : 2800 USD ($)/Unit Minimum Order Quantity : 1 Display Type : Digital LCD Usage : Textile laboratory and Quality control Max Height : 340 mm Application : Determining fabric abrasion and pilling resistance Features : Automatic stop, individual counters, selectable speed Test Stroke : 60.5 0.5 mm Interface Type : Manual and digital interface Capacity : Multiple samples simultaneous testing Resolution : 1 cycle Test Width : 90 mm (specimen diameter) Temperature : 18C 30C Specimen Size : 38 mm diameter (abrasion); 140 mm (pilling) Power Supply : AC 220V, 50Hz Equipment Type : Martindale Abrasion Pilling Tester Frequency : 50 Hz Test Speed : 24 0.5 rpm Accuracy : 1 cycle Mounting Type : Bench Top Control Mode : Digital Timer and Counter Test Range : 1 999,999 cycles Number of Specimens : 4, 6 or 8 positions (as per model) Automation Grade : Semiautomatic Measuring Range : User configurable Response Time : Instantaneous Machine Weight : Approx. 85 kg Humidity : 20% 65% RH (recommended) Operating Voltage : 220V Port Size : Standard power port

Send Inquiry

Needle Metal Detector Price : 799 USD ($)/Set Minimum Order Quantity : 1 Display Type : Digital LCD Usage : Textile and Garment Industry Max Height : 1200 mm Application : Detection of broken needles and metal contaminants in garments, textiles, food, and plush toys Features : Autodetection, Alarm, Stop Conveyor Test Stroke : Customizable Interface Type : Push Button, LCD Panel Capacity : High throughput Resolution : 0.8 mm Test Width : 600 mm Temperature : 0C~40C Specimen Size : Up to test width Power Supply : AC 220V 10%, 50/60 Hz Equipment Type : Needle Metal Detector Frequency : 50/60 Hz Test Speed : 30 m/min Accuracy : High up to 99% rejection of metal contaminants Mounting Type : Conveyor Type Control Mode : Digital Test Range : 0.8 mm to 2.5 mm ferrous particles Number of Specimens : Multiple (Batch Processing) Automation Grade : Automatic Measuring Range : 0.8 mm2.5 mm (iron) detection Response Time : Instantaneous (alarm on detection) Machine Weight : Approx. 200 Kg Humidity : 85% RH Operating Voltage : 220V AC Port Size : 800 mm (Conveyor Width)

Send Inquiry

SEND INQUIRY CALL ME FREE

HAIDA INTERNATIONAL EQUIPMENT CO., LTD.

Contact Details

FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town,Dongguan - 523710, Guangdong, China
Phone :86-1591-7693151
haidads@qc-test.cn
Send Inquiry

Email us : haidads@qc-test.cn

Ms Lisa (Manager)
Mobile : +8613662707979, +8613829267288, +8615016776323, +8618373745787, +8618236912012, +8613602361535, +8613925747786

Send Inquiry

Quick Links