Product Description
Humidity And Temperature Test Chamber
Applications
To simulate test environment with different temperature and humidity
Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test
Standard Features
Model | HD-E702-100-4 |
Internal dimension(W*D*H) | 400*500*500mm |
External dimension(W*D*H) | 900*1400*1070mm |
Temperature range | -40~+150 |
Temperature Accuracy | ±1 |
Humidity range | 20~98%R.H. (Refer Image below) |
Humidity accuracy | ±3%R.H |
Cooling speed | 1 min in average (without loading) |
Heating speed | 3 min in average (without loading) |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Cooling method | Air cooling |
Controller | Korea TEMI 880 controller LCD touch screen, programmable control temperature and humidity Can set different parameter for cyclic test |
Insulation material | 50mm high density rigid Polyurethane foam |
Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
Compressor | France Tecumseh compressor |
Lighting | Heat resistance |
Temperature sensor | PT-100 dry and wet bulb sensor |
Observation window | Tempered glass |
Testing hole | Diameter 50mm, for cable routing |
Safety protection device | Protection for leakage Over-temperature Compressor over voltage and overload Heater short circuit Water shortage |
![]() |
HAIDA INTERNATIONAL EQUIPMENT CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |