Memory Sponge Fatigue Test Machine

1500 USD ($)/Set

Get a Price/Quote

Product Details:

Power Supply AC 220V / 50Hz
Mounting Type Floor standing
Display Type Touch LCD display
Humidity 40%~90% RH
Test Range 0-99999 cycles
Response Time 1 second
Hardness Applicable to 10~60 Shore A foam
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Memory Sponge Fatigue Test Machine Price And Quantity

Price 1500 USD ($)/Set
Minimum Order Quantity 1 Set

Fixture Type Custom upper and lower compression plates
Sample Loading Manual or automatic options available
Maintenance Low maintenance, easy calibration
Safety Protection Automatic overload and emergency stop
Noise Level < 65 dB
Test Environment Can be customized for high/low temperature chambers
Data Storage Internal memory and USB data output

Memory Sponge Fatigue Test Machine Product Specifications

Mounting Type Floor standing
Test Width 300 mm
Display Type Touch LCD display
Test Range 0-99999 cycles
Humidity 40%~90% RH
Response Time 1 second
Test Speed 20 2 r/min
Power Supply AC 220V / 50Hz
Measuring Range 0-750N
Temperature 0~40
Automation Grade Automatic
Specimen Size (L) 380 mm x (W) 300 mm x (H) 50 mm
Operating Voltage 220 V
Hardness Applicable to 10~60 Shore A foam
Resolution 0.1 N
Control Mode PLC control, touch screen operation
Number of Specimens 1
Frequency 50Hz
Gas Pressure 0.5-0.7 MPa
Max Height 1.1 m
Application Memory sponge/density foam fatigue test and repeated compression test
Interface Type RS232/USB
Machine Weight 80 kg
Usage Memory sponge fatigue and compression testing
Capacity Adjustable, default 750N
Test Stroke 100 1 mm
Accuracy 0.5% F.S.
Port Size 8 mm
Equipment Type Foam Fatigue Test Machine
Features Precise load control, auto-stop, cumulative cycle counter

Fixture Type Custom upper and lower compression plates
Sample Loading Manual or automatic options available
Maintenance Low maintenance, easy calibration
Safety Protection Automatic overload and emergency stop
Noise Level < 65 dB
Test Environment Can be customized for high/low temperature chambers
Data Storage Internal memory and USB data output

Memory Sponge Fatigue Test Machine Trade Information

FOB Port Shenzhen
Supply Ability 10-30 Set Per Month
Delivery Time 1 Week
Packaging Details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Certifications CE,ISO

Product Description

The usage:

Memory sponge fatigue tester is used to test sponge fatigue by repeating indentation of a test piece by an indentor smaller in area than the test piece,the maximum load reached during each cycle being kept within specified limits.

Technical parameters:

Control:computer control and display
Induction way: Precision load
Capacity:200kg
Unit:Kg,N,LB
Up plate: diameter 200mm,bottom fillet R1mm;Low plate:420×420mm,holes diameter 6mm,space 20mm
Max stroke:200mm
Test speed: 100±20mm/min
Motor:AC Inverter motor
Transmission:Precision screw
Machine size:( L×W×H) about 1220×750×1260mm
Configuration: One computer and operate software
Weight:about 200kg

Precise and Reliable Fatigue Testing

This machine delivers precise measurement of compression fatigue in memory sponge and foam samples, supporting adjustable capacity up to 750N and a measuring accuracy of 0.5% F.S. The touch LCD display ensures live monitoring of test cycles, with settings easily adjusted via PLC touch controls for consistent, repeatable results. The system supports up to 99999 test cycles and specimen sizes up to 380 x 300 x 50 mm, making it versatile for a range of material testing requirements.

Advanced Safety and Easy Operation

Safety features like automatic overload protection and emergency stop function provide comprehensive risk mitigation for operators. The intuitive touch screen, manual and automatic sample loading options, and low maintenance requirements make this equipment accessible for both novice and experienced users. Floor-standing design with a compact footprint supports efficient use of space in labs or production environments.

FAQs of Memory Sponge Fatigue Test Machine:

Q: How does the Memory Sponge Fatigue Test Machine ensure operator safety during testing?

A: Operator safety is safeguarded by integrated automatic overload protection and emergency stop functions. These features halt the machine immediately if unsafe conditions arise, minimizing risks during operation.

Q: What types of specimens can be tested and what are their size requirements?

A: The machine can accommodate a single specimen with dimensions up to 380 mm in length, 300 mm in width, and 50 mm in height. It is suitable for testing memory sponges and density foams, particularly those within the 1060 Shore A hardness range.

Q: When should this machine be used in the product quality control process?

A: This equipment is ideal for use during product development, manufacturing, and quality assurance phases whenever repeated compression or fatigue testing of memory sponges and foams is required to verify durability and performance standards.

Q: Where can the test environment be customized for high or low temperature analysis?

A: The test chamber supports customization to enable testing under controlled high or low temperature conditions, with adjustable parameters to suit specific material or regulatory requirements.

Q: What is the process for loading samples into the machine?

A: Samples can be loaded manually or automatically, depending on user preference. Custom upper and lower compression plates ensure secure placement and consistent pressure during testing.

Q: How does the machine handle test data storage and output?

A: Task results are stored internally and can be easily exported via USB or RS232 interfaces for further analysis or archiving, supporting efficient data management in laboratory workflows.

Q: What benefits does the Memory Sponge Fatigue Test Machine offer to manufacturers and researchers?

A: It provides accurate, repeatable fatigue test results, simple operation, and customizable test environments. Low maintenance, precise load control, and automated cycle counting increase efficiency and reliability for manufacturers, distributors, and researchers alike.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Furniture Test Equipment' category

Table Lock Durability Test Instrument Minimum Order Quantity : 1 Power Supply : AC 220V 10%, 50/60Hz Mounting Type : Benchtop Features : Programmed cycling, autostop, lock detection, result display Usage : Testing table lock endurance and quality Application : Durability and cycle life testing for table locks and furniture hardware Control Mode : PLC Touch Screen Control Resolution : 0.1 mm Operating Voltage : 220 V Specimen Size : Customizable, suitable for table lock specimens Automation Grade : Automatic Temperature : 10C ~ 35C Measuring Range : 0300 mm (stroke) Test Speed : 5100 cycles/min adjustable Response Time : Instantaneous Humidity : 85% RH Test Range : 099999 cycles Display Type : Touch Screen LCD Test Width : 600 mm Equipment Type : Table Lock Durability Test Instrument Port Size : 8 mm Accuracy : 1% Test Stroke : 0300 mm adjustable Capacity : Test fixtures up to 50 kg maximum Machine Weight : 120 kg Interface Type : RS232/USB Max Height : Adjustable up to 1 meter Gas Pressure : 0.5~0.8 MPa Frequency : 50/60 Hz Number of Specimens : 1 Hardness : Fixture construction: approx. 60 HRC

Send Inquiry

3 Sofa Durability Tester( EN 4875) Price : 13000 USD ($)/Unit Minimum Order Quantity : 1 Power Supply : AC 220V, 50Hz Mounting Type : Floormounted Features : Cyclic compression, programmable test protocols, realtime data logging Usage : Laboratory and industrial furniture testing Application : Testing the durability and fatigue resistance of sofas as per EN 4875 Control Mode : Programmable microprocessorbased control Resolution : 0.1 kg Operating Voltage : 220V AC Specimen Size : Maximum: 2100 x 1100 x 1200 mm Automation Grade : Fully automatic Temperature : 10C~40C Measuring Range : Up to 200 kg Test Speed : 2050 cycles/min (adjustable) Response Time : <1 second Humidity : 20%~90% RH Test Range : Up to 100,000 cycles Display Type : Digital display with cycle counter Test Width : 1200 mm Equipment Type : Sofa Durability Tester Port Size : Standard international fitting Accuracy : 1% of reading Test Stroke : 50300 mm (adjustable) Capacity : 200 kg Machine Weight : Approx. 180 kg Interface Type : RS232 / USB Max Height : 1200 mm Gas Pressure : 0.5 MPa Frequency : Adjustable, up to 50 Hz Number of Specimens : 1 sofa at a time Hardness : N/A (not applicable)

Send Inquiry

Foam Compression Hardness Tester Price : 4000 USD ($)/Unit Minimum Order Quantity : 1 Power Supply : AC 220V, 50Hz Mounting Type : Floor standing Features : Automatic Reset, Data Storage, Overload Protection Usage : Foam compression and hardness testing Application : Determination of hardness and firmness of flexible cellular foam Control Mode : Digital, Touchscreen Control Resolution : 0.1 kgf Operating Voltage : AC 220V, 50Hz Specimen Size : 380 x 380 mm (Min. 50 mm thickness) Automation Grade : Semiautomatic Temperature : Room temperature (10 ~ 35C) Measuring Range : 0~200 kgf Test Speed : 100 mm/min Response Time : 2 s Humidity : 40% ~ 70% RH Test Range : 0200 kgf Display Type : Digital LCD Test Width : 500 mm Equipment Type : Foam Compression Hardness Tester Port Size : 1/4 BSP Accuracy : 1% of full scale Test Stroke : 300 mm Capacity : 200 kg Machine Weight : Approx. 110 kg Interface Type : RS232/USB Max Height : 400 mm Gas Pressure : 6~8 kg/cm Frequency : 50Hz Number of Specimens : 1 specimen per test Hardness : 20200 N

Send Inquiry

Dynamic foam fatigue tester Price : 4000 USD ($)/Set Minimum Order Quantity : 1 Power Supply : 230 V AC, 50 Hz Mounting Type : Floor mounted Features : Programmable cycles, Rugged structure, Digital display Usage : Foam quality and endurance testing Application : Testing durability and fatigue resistance of foam Control Mode : Digital control with timer Resolution : 1 Cycle Operating Voltage : 230 V AC Specimen Size : 380 x 380 x 50 mm or as per standard Automation Grade : Semiautomatic / automatic Temperature : 10 40 b0C operating range Measuring Range : 0 50 kg loading capability Test Speed : 60 cycles/minute Response Time : Immediate start/stop with microprocessor control Humidity : Up to 85% RH Test Range : Upto 1,00,000 cycles Display Type : Digital LED or LCD Test Width : 500 mm Equipment Type : Dynamic Foam Fatigue Tester Port Size : Standard sample platform size: 500 x 500 mm Accuracy : b11% on cycle count Test Stroke : 75 b1 1 mm Capacity : 50 kg max load Machine Weight : Approx. 80 kg Interface Type : Pushbutton panel with cycle counter Max Height : 1200 mm (with arm in top position) Gas Pressure : Not required (applicable for pneumatic models) Frequency : 50 Hz Number of Specimens : Single specimen Hardness : Suitable for foam densities 1660 kg/m3

Send Inquiry

SEND INQUIRY CALL ME FREE

HAIDA INTERNATIONAL EQUIPMENT CO., LTD.

Contact Details

FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town,Dongguan - 523710, Guangdong, China
Phone :86-1591-7693151
haidads@qc-test.cn
Send Inquiry

Email us : haidads@qc-test.cn

Ms Lisa (Manager)
Mobile : +8613662707979, +8613829267288, +8615016776323, +8618373745787, +8618236912012, +8613602361535, +8613925747786

Send Inquiry

Quick Links