Chair Drop Impact Testing Equipment

1 USD ($)

Get a Price/Quote

Product Details:

Frequency 10-30 drops/min adjustable
Application Drop impact test for chair seat and back
Power Supply AC 220V, 50/60 Hz
Test Range Standard and custom seating sizes
Humidity 20% ~ 90% RH
Features Programmable Control, Adjustable Height, High Stability Base, Emergency Stop, Positioning Device
Response Time Instantaneous (real-time display)
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Chair Drop Impact Testing Equipment Price And Quantity

Price 1 USD ($)
Price Range 2500.00 - 6500.00 USD ($)
Minimum Order Quantity 1 Set

Floor Requirement Level, vibration-free surface
Test Duration Setting Programmable via touch screen
Data Output USB and digital export available
Standards Compliance BIFMA, EN 1335, ISO 7173
Impact Block Weight Standard 57 kg (can be adjusted as per testing standard)
Air Supply Requirement Clean compressed air, filtered
Color As per manufacturer standard (typically industrial grey/blue)
Drop Mechanism Pneumatic cylinder driven
Safety System Emergency stop switch and overload protection
Material of Construction High quality steel frame with anti-corrosive finish

Chair Drop Impact Testing Equipment Product Specifications

Max Height Up to 500 mm adjustable
Display Type Digital/Touch Screen
Number of Specimens Single specimen per test
Temperature 15C ~ 40C
Test Speed Adjustable, typically 10-30 times/min
Interface Type Digital interface, PLC
Gas Pressure 0.5~0.8 MPa (compressed air)
Resolution 1 mm
Automation Grade Semi-automatic
Specimen Size Any standard office or guest chair
Measuring Range Adjustable drop height 0-500 mm
Mounting Type Floor Mounted
Accuracy 1 mm
Equipment Type Chair Drop Impact Testing Equipment
Operating Voltage AC 220V
Machine Weight About 150 kg
Humidity 20% ~ 90% RH
Test Range Standard and custom seating sizes
Power Supply AC 220V, 50/60 Hz
Features Programmable Control, Adjustable Height, High Stability Base, Emergency Stop, Positioning Device
Response Time Instantaneous (real-time display)
Port Size Standard Chair Mount
Test Width 600 mm
Capacity Maximum load up to 200 kg
Usage Testing the drop impact resistance of chairs
Application Drop impact test for chair seat and back
Control Mode PLC Touch Screen Control
Frequency 10-30 drops/min adjustable
Test Stroke 0-500 mm adjustable

Floor Requirement Level, vibration-free surface
Test Duration Setting Programmable via touch screen
Data Output USB and digital export available
Standards Compliance BIFMA, EN 1335, ISO 7173
Impact Block Weight Standard 57 kg (can be adjusted as per testing standard)
Air Supply Requirement Clean compressed air, filtered
Color As per manufacturer standard (typically industrial grey/blue)
Drop Mechanism Pneumatic cylinder driven
Safety System Emergency stop switch and overload protection
Material of Construction High quality steel frame with anti-corrosive finish

Chair Drop Impact Testing Equipment Trade Information

FOB Port shenzhen
Payment Terms Cash on Delivery (COD), Letter of Credit (L/C), Paypal, Western Union, Letter of Credit at Sight (Sight L/C), Delivery Point (DP), Cash Against Delivery (CAD), Telegraphic Transfer (T/T), Days after Acceptance (DA), Cash in Advance (CID), Cheque, Cash Advance (CA)
Supply Ability 150 Set Per Month
Delivery Time 15 Days
Packaging Details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Main Export Market(s) Australia, Middle East, Africa, Western Europe, Central America, South America, Asia, Eastern Europe, North America

Product Description

Specifications

Durability of the seat of the chair drop impact testing equipment :
Drop impact test machine is used to test the durability of the seat of the chair.

Specifications

Mode	HD-F736
Counter	0-999,999, memory, output control
Impact sandbags diameter	16 inch 125 pounds standard sandbbags
Static pressure mould diameter	8 inch, 165 pounds briquetting
Impact speed	10-30 times/minute or specified
Static pressure speed	10-30 times/minute or specified
Cylinder stroke	0-300mm
Rail height	90-135cm
Machine size	2708580cm
Power	AC220V, 3A
BIFMA requirements	impact 100000 times+ static pressure 20000 times(left) +static pressure 20000times (right)

The usage

Drop impact test machine is a two station testing equipment.
According to test Standard: BIFMA X5.1-2002, Test No. 8,11
Durability of the seat of the chair drop impact testing equipment is designed for dynamic and cyclic durability seat test.
Applicability: This test applies to all types of chairs.
Purpose of Test: to evaluate the ability of a chair to withstand heavy impact forces on the seat.
Bifma 5.1 in Section 8, Section 11.3 x 5.9 and 7.2 in Section 7
Impact components: the impact of institutions perform freefall
Automatic cycle Freefall (Free Fall) impact function to achieve lasting impact test;
The impact of a single manual function, structural strength to achieve a single impact test; (weight: 57 +136 kg)
With 136KG heavy bags

Main features:

Test sofa or furniture in the overall strength of the collision of the transportation and installation

Impact test seat, armrest shock, resting legs impact

The impact of product testing seat, armrest shock, resting legs shock.

The main technical parameters:

1 digital height indicator Drop height: 3 inches to 16 inches (75mm ~ 406mm)

2 Test Views: 0 ~ 32000 times

3 Maximum specimen size:. (L W H) 1000 1000 1200mm

4 Drop Bag Weight: 75lb, 200lb

5 Dimensions:. (L W H) 1600 1300 2500mm

6 Power:. 3 , AC380V, 50HZ, 1HP

7 Weight (approximately): about 380kg

8 Transmission: Electric Transmission

Advanced Chair Impact Testing

This cutting-edge equipment uses a pneumatic-driven mechanism and a programmable PLC touch screen interface, allowing highly controlled drop testing for office and guest chairs. With adjustable drop heights up to 500 mm and flexible test widths, it accurately simulates real-world impact scenarios. The sturdy steel construction with anti-corrosive coating ensures durability and long service life, making it perfect for rigorous daily use in quality assurance laboratories.

Compliance and Versatile Application

Designed to comply with international standards like BIFMA, EN 1335, and ISO 7173, this tester supports standard and custom seating sizes. It is applicable for assessing the structural integrity of various chair models, ensuring eligibility for global markets. With multiple operating features and a comprehensive safety system, this equipment streamlines the drop impact test process for manufacturers, exporters, and quality evaluators.

Data Management and User Safety

Equipped with instant digital display and USB export functionality, the system enables seamless data analysis and record-keeping. The emergency stop switch and overload protection enhance operator safety during testing. User-friendly controls facilitate efficient processes and minimize errors, while requirements such as filtered compressed air and stable floor placement ensure accurate and repeatable results.

FAQs of Chair Drop Impact Testing Equipment:

Q: How does the Chair Drop Impact Testing Equipment operate?

A: The equipment operates by mounting a chair specimen and using a pneumatic cylinder to drop a standard impact block (typically 57 kg) from programmable heights between 0500 mm. All actions are controlled via a PLC touch screen, with the test speed and duration fully adjustable to match specific standards.

Q: What chairs and sizes can be tested with this equipment?

A: This system accommodates any standard office or guest chair, supporting both standard and custom seating sizes. The maximum load capacity is 200 kg, and the mounting ports suit most chair types within a test width of 600 mm, making the tester versatile across various models.

Q: When should I use the emergency stop feature?

A: The emergency stop switch should be activated immediately if any unsafe condition or malfunction arises during a test. This instantly halts operation, thereby protecting both the operator and the specimen. The equipment is also equipped with overload protection for additional safety.

Q: Where should the equipment be installed for optimal performance?

A: Install the chair drop impact tester on a flat, level, and vibration-free surface. Ensuring a stable base is critical for accurate test results. The equipment requires access to filtered, clean compressed air and a standard 220V power supply.

Q: What is the typical process for conducting a drop test?

A: Place the chair on the mounting port, adjust the impact block weight if necessary, and set the drop height and frequency using the touch screen. Initiate the test, and the equipment will drive the impact block to drop on the chair at programmed intervals. Test data is displayed instantly and can be exported digitally.

Q: How does this equipment benefit furniture testers and manufacturers?

A: This solution delivers reliable, repeatable results aligned with international standards (BIFMA, EN 1335, ISO 7173), allowing faster product validation, enhanced safety, and streamlined data management. The adjustability and automation reduce manual effort, while robust safety systems ensure secure operation.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Furniture Test Equipment' category

Servo Motor Foam Drop Ball Impact Tester Price : 1800 USD ($)/Unit Minimum Order Quantity : 1 Display Type : Digital LCD Max Height : 600 mm Temperature : 10C 40C Number of Specimens : 1 at a time Specimen Size : 400 x 400 mm Measuring Range : 0 999.9 J Mounting Type : Floor Standing Automation Grade : Automatic Interface Type : RS232/USB Resolution : 0.1 J Gas Pressure : Not Required (servo motor operation) Test Speed : 0.1 2 m/s (adjustable) Operating Voltage : AC 220V Equipment Type : Foam Impact Testing Machine Accuracy : 1% Features : Servo driven, programmable parameters, data output, safety enclosure, emergency stop Humidity : 20% 80% RH Machine Weight : Approx. 80 kg Test Range : 10 J to 50 J Power Supply : AC 220V, 50Hz Test Width : 300 mm Port Size : Standard Ball Drop Port Response Time : <50 ms Application : Foam impact resistance & energy absorption test Control Mode : Servo Motor Control + PLC Frequency : 50/60Hz Usage : Impact drop test on foam material Capacity : Foam block or sample up to 100 mm height Test Stroke : 600 mm Hardness : Conforms to foam standards

Send Inquiry

ASTM F1566-2009 Mattress Rollator Durability Tester/Compression Hardness tester Price : 5699 USD ($)/Unit Minimum Order Quantity : 1 Display Type : Digital LCD Display Max Height : 600 mm (mattress thickness) Temperature : 10~40C Number of Specimens : 1 mattress per test Specimen Size : Single/Double/King size mattress (customizable) Measuring Range : 0~1000 mm Mounting Type : Floorstanding Automation Grade : Automatic Interface Type : USB / RS232 Resolution : 0.1 mm Gas Pressure : 0.5~0.7 MPa Test Speed : 20 2 cycles/min Operating Voltage : 220V, single phase Equipment Type : Mattress Durability & Hardness Tester Accuracy : 1 mm Features : Programmable cycles, Data storage, Emergency stop, Adjustable roller stroke Humidity : 20%~90% RH Machine Weight : Approx. 380 Kg Test Range : Upto 1200 mm Power Supply : AC 220V / 50Hz Test Width : 800 mm Port Size : Standard Response Time : 1s Application : Mattress Durability test as per ASTM F15662009 Control Mode : Touchscreen PLC Control Frequency : 50/60 Hz Usage : Lab/Quality Control for mattress durability and hardness evaluation Capacity : 140 kg test load Test Stroke : 100400 mm (adjustable) Hardness : As per ASTM F15662009

Send Inquiry

Foam Strength Tester Price : 4000 USD ($)/Unit Minimum Order Quantity : 1 Display Type : Digital LCD Max Height : 100 mm Temperature : 10C40C Number of Specimens : 1 Specimen Size : 100 mm 100 mm 50 mm Measuring Range : 0500 N Mounting Type : Tabletop Automation Grade : Semiautomatic Interface Type : RS232 Resolution : 0.01 N Gas Pressure : 0.6 MPa Test Speed : 100 mm/min Operating Voltage : 220 V Equipment Type : Foam Strength Tester Accuracy : 1% Features : High stability, Easy operation, Safety protection Humidity : 4585% RH Machine Weight : 30 kg Test Range : 0500 N Power Supply : 220V AC, 50Hz Test Width : 50 mm Port Size : 6 mm Response Time : <1 s Application : Foam Compression and Strength Testing Control Mode : Manual/Automatic Frequency : 50 Hz Usage : Laboratory/Industrial Capacity : 500 N Test Stroke : 100 mm Hardness : Applicable for all foam hardness

Send Inquiry

Foam pound apparatus Price : 1500 USD ($)/Unit Minimum Order Quantity : 1 Display Type : Digital LED display Max Height : 1200 mm Temperature : 10C to 40C Number of Specimens : 1 Specimen Size : 380 mm 380 mm 50 mm Measuring Range : 0 1000 N Mounting Type : Floormounted Automation Grade : SemiAutomatic Interface Type : RS232/USB Resolution : 1 N Gas Pressure : 0.4 0.6 MPa Test Speed : 60120 strokes/min adjustable Operating Voltage : 220240V AC Equipment Type : Foam Pound Testing Apparatus Accuracy : 1% of full scale Features : Programmable cycle, sturdy body, precision control, easy specimen fixture Humidity : 10% to 80% RH Machine Weight : Approx. 60 kg Test Range : 0 1000 N Power Supply : 230 V AC, 50 Hz, single phase Test Width : 300 mm Port Size : 10 mm Response Time : <2 s Application : Physical property evaluation of foam for durability and resistance to pounding Control Mode : Digital Control with timer Frequency : 50 Hz Usage : Foam resilience and durability testing Capacity : Up to 20 kg Test Stroke : 90140 mm adjustable Hardness : Up to 80 Shore A

Send Inquiry

SEND INQUIRY CALL ME FREE

HAIDA INTERNATIONAL EQUIPMENT CO., LTD.

Contact Details

FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town,Dongguan - 523710, Guangdong, China
Phone :86-1591-7693151
haidads@qc-test.cn
Send Inquiry

Email us : haidads@qc-test.cn

Ms Lisa (Manager)
Mobile : +8613662707979, +8613829267288, +8615016776323, +8618373745787, +8618236912012, +8613602361535, +8613925747786

Send Inquiry

Call Me Free

Quick Links