Call Us
Chair Seat Rotating Testing Machine

Chair Seat Rotating Testing Machine

Product Details:


Product Description

Our company is well known manufacturer and supplier of this Chair Seat Rotating Testing Machine. This machine essentially uses a roller screw direct actuator to apply loads and position with an abnormal state of exactness. The actuator is mounted to a remarkable arrangement of direct course which permit vertical, even, and corner to corner movement. It is our most adaptable machine and will rapidly turn into an imperative piece of your research facility. Offered range of Chair Seat Rotating Testing Machine is offered by us at market leading cost from us.


  • Seat Rotating Testing Machine is utilized to test the strength of the seat swivel of the seat. As indicated by test Standard: BIFMA X5.1-2002, Test No. 8,11
The utilization:
  • Office Chair Seat Rotating Testing Machine is a two station testing hardware.
  • As indicated by test Standard: BIFMA X5.1-2002, Test No. 8,11
  • Pertinence: This test applies to a wide range of the swiveling seats.
  • Reason for Test: to assess the capacity of a seat to withstand substantial effect drives on the seat.
  • Office Chair Seat Rotating Testing Machinery intended for dynamic and cyclic solidness situate test.
Primary capacity:
  • Seat Rotating Testing Machine applies on all sort of office seat which with swivel stage. Used to assess the workplace seat to withstand rehashed weight and wear capacity in pivot. It give two method of testing
  • Can set the clockwise and counter-clockwise angle(45to 355)
  • 360rotation single bearing

Standard Features :


1 framework with traverse member and base plat 1200mm 1200 mm, 12mm thick, galvanized steel

Rotation test axis

1 electromotive test axis for the rotation of the turning knob, position-controlled, rotation angle +/- 360

Pneumatic test axis

1 pneumatic test axis for seat, load controlled, position diameter 80mm, stroke 500mm


Load up to 1900N, 2 Load Cell 2KN. Load is transmitted vertically to the seat with lateral adjusting range

Limit Control

Operating pressure and cylinder limit switch control

Emergency Button

1 emergency button

Number and Cycles

Can be set by PLC ( 0- 99,999)

Accessories (Optional)

1 load pad diameter 200mm DIN EN 1335

Specifications :

Office Chair Seat Rotating Testing Machine




0-999,999, memory, output control

Impact sandbags diameter

16 inch 125 pounds standard sandbbags

Static pressure mould diameter

8 inch, 165 pounds briquetting

Impact speed

10-30 times/minute or specified

Static pressure speed

10-30 times/minute or specified

Cylinder stroke


Rail height


Machine size



AC220V, 3A

BIFMA requirements

impact 100000 times+ static pressure 20000 times(left)+static pressure 20000times (right)

Other details :




15 days after order.





Brand Name



Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.


L/C, D/P, T/T



Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Furniture Test Equipment' category

trade india member
HAIDA INTERNATIONAL EQUIPMENT CO., LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.