Product description
UV lamp environment tester simulates damaging effects of long term outdoor UV spectra of sunlight heat moisture on materials and coatings It exposes specimen to varying conditions of weathering ultraviolet radiation moisture and heat to test the performance and improve the quality
USAGE
Technical parameters:
Accelerated Weather UV test machine
Studio Size | 400W 1140D 390Hmm |
Outside dimension | 500W 1300D 1360Hmm |
Materials | Inside and Outside SUS 304 stainless steel |
Temperature range | RT+10 70 C |
Temperature uniformity | 2 C |
Temperature fluctuation | 0.5 C |
Temperature control | PID SSR control |
Humidity range: | 90%RH |
Controller | Korean TEMI 880 programmable controller |
Control mode | Balance temperature humidity control (BTHC) |
Test cycle setting | Illumination, condensation and water spray test cycle is programmable |
Lamp power | 40W/Piece |
Distance from sample to lamp | 50 2mm (adjustable) |
Centre distance between the lamp | 70mm |
Irradiance | 1.0W/cm2 |
Wavelength ultraviolet light | UV-A: 315-400nm UV-B: 280-315nm (8pcs, 1600h lifetime) |
Effective irradiation areas | 640 1140mm |
Irradiation black panel temperature | 50C 70 C |
Standard Specimen Size | 75 150mm or 75 3000mm (special specitications to be described in the contact) |
Required water depth for water channel | 25mm, automatically control |
Testing time | 0999H, adjustable |
Power | 220V/50Hz /10% 5KW |
Protection system | Overload short circuit protection, over temperature protection, water lackin |
![]() |
HAIDA INTERNATIONAL EQUIPMENT CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |